HD-SDI High Speed Dome Camera
24
D. Watch Time
1~200 seconds can be set.
E. Return to previous menu
4. Auto setup
A. Preset setup
Preset setup means, the current camera angle, zoom and other camera parameters can be saved as a preset position, and it can be
called quickly if need.
a)
Preset No.: 1~128 presets can be set
b)
Speed: 1~63 speed can be set
c)
Dwell: preset delay time, 1~60sencond can be set
B. Scan set
The PTZ camera can record the normal operation at least one minute. Then the camera can scan circularly according to the recorded
tracks. 4 tracks can be recorded. (This function is available for some special PTZ with pattern function only)
C. Patrol set
The presets can be programmed in together as groups. 8 groups tracks can be set for this PTZ camera, 16 presets for each group tracks.
The camera can automatically scanning after setting.
D. Auto set
The user can set the camera run automatically according to this setting.
“
OFF
”
: auto off
“
Area-S Fast
”
: auto area scanning at high speed
“
Area-S Medi
”
: auto area scanning at medium speed
“
Area-S Slow
”
: auto area scanning at slow speed
“
Presetgr01
”
:auto scanning as preset group 01
…
“
Presetgr08
”
:auto scanning as preset group 08
E. Run
“
ON/OFF
”
is optional, Start to run the auto settings.
F. Power Fail Safeguard (PFS)
“
ON/OFF
”
is optional, when it is set ON, the camera will recover to the working status after power is on. All settings can be saved.
G. IR AUTO ON or OFF
H. RETURN
5. Exit
Exit menu
Appendix I
：
Lightning Protection & Surge protection
The system must be grounded with equal potentials. The earth ground connection must satisfy the anti-interference and electrical
