HD-SDI High Speed Dome Camera
12
Camera with pole mount is suitable for firm pole structure indoor and outdoor
1. Installation requirements:
1) The outside diameter of the pole must be in the range of 130-150mm (5.12 ~6 inches).
⑵
The Pole structure must be firm enough to bear 4 times the weight of the speed dome.
2. Install Pole mount accessory and wall mount bracket:
1) Refer to picture 22, put Power/RS485/Video cables through the hole of corner base and use M8 nuts to fasten corner base on the
mounting surface.
NOTE
: Put cables through the wall or aside the corner base.
Picture 22
⑵
Refer to picture 23,let power/RS485/video cables go through hole of wall mount, and fix wall mount on pole mount accessories
.
Picture 23
Note:
If the camera is used outdoor environment, please seal gum water on the gap between wall mount bracket and corner mount
accessory
Install upper cover: refer to upper cover installation of wall mount.
Connect cable: refer to cable connection of wall mount.
Connect down cover: refer to down cover connection of wall mount .
Install camera: refer to camera installation of wall mount.
Install down cover: refer to down cover installation of wall mount.
5) Pendent mount
Installation requirements:
(1)
The ceiling must be firm enough to bear 4 times the weight of the speed dome.
(2)
The wall mounting surface must be firm enough to install expansive screws.
1. Mark screws positions
Take the bracket base as the template to mark the screws positions on ceiling. Drill the holes and put expansion screws inside, refer to
Picture 24.
