HD-SDI High Speed Dome Camera
9
Picture 13
⑵
refer to picture 14
，
insert M8 expansive screw
，
then let power cable, video/ control cable go through wall mount bracket and fix wall
mount on the wall.
Picture 14
Note
：
Apply silicone to the gap between bracket and wall in the case of outdoor dome.
2. Install upper cover:
Loosen the M4 bolt and swing away the power board holder, let cables go through upper cover, then cling upper cover to pipe and tighten
M4 screw.
（
refer to Picture 15
）
Picture 15
Note
：
If the speed dome is used in outdoor environment
，
please wrap more belt on screw thread, then screw upper cover to wall
mount.
3. Connect Cable:
⑴
Connect power cable and RS485 control cable
Warning: must turn off power supply when connecting cable
⑵
Connect video output cable,
⑶
Thunderproof ground cable connection
When speed dome is installed outdoor, ground wire must connect to ground alone, the resistance must be less than 4 ohm.
