HD-SDI High Speed Dome Camera
18
8. Install black liner and Pan/Tilt Module
Push the black liner into the two locking tabs. Align the pan/tilt module to the two clips, red to red, black to black and match the holes
in pan/tilt module and the two guide poles. Gently push the module upward until you hear two click sound.
AMP Socket
Red Clip
Red Lable
NOTE:
Be sure the AMP sockets are clean without dust. DO NOT forget to remove the lens cover.
9. Install down cover
Loosen the two M4 screw on down cover ring. Apply lubricant to the O-ring to make down cover easier to slip in. Push upward the
down cover into the housing and then fasten down cover with two M4 screws.
