manualshive.com logo in svg

Benefon Track One, Owner'S Manual

Share
Download
Benefon Track One Owner'S Manual Download Page 41

BENEGUARD-BUTTON: SOS MESSAGES AND SOS CALLS       35

SOS PROCEDURE

The SOS procedure can always be started,
regardless of the state of the phone: in case
a call is in progress and you start the emer-
gency call, the currently active call will be
put on hold. 

Please note that if there are missing emer-
gency numbers, false SOS presses, can-
celled SOS presses, busy telephone lines,
battery out-of-charge incidents, message
transmission errors or poor network cover-
age, the SOS message might not be sent or
an SOS call might not be made. 

SOS procedure when only sending short
message  

1. Press the SOS button (

<

) on the top

of the phone. 

 -

Press and hold down the SOS button

or

 press the button quickly twice de-

pending on the instructions dis-
played. 

2. At the same time when sending the mes-

sage, the phone sends the position in-
formation. If the current position
coordinates are not available, the previ-
ous coordinates will be sent instead. 

3. If the 

Emergency confirmation

 setting is

turned on, the phone will go on send-
ing the message until receiver of the
message sends the confirmation to your
phone.     

4. As a sign of a sent SOS message, the  text

SOS message sent

 will be displayed and

the sound of the emergency environ-
ment will be stopped.

PRESSING THE BENEGUARD BUTTON WILL:

• turn the phone on

• turn the GPS on

• start the emergency procedure (if no PIN or PUK

code are required).

Summary of Contents for Track One


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands