Benefon Track One Owner'S Manual Download Page 109

Page: 109 / 177

MEMO: MESSAGES 103

Finally confirm the correct word by press-
ing

You can also switch into the spelling mode
(by pressing

WRITING MESSAGES WITH

SPELLING MODE

Turn the T9 mode off by pressing

When the T9 mode is turned off, there is no

in the display.

The special characters are all found under
the

-key. For further information about

special characters, please see the T9 in-
structions in the previous chapter

Writing

messages with T9 mode, Adding special
characters

Correcting the text: With

you can move

back and forth inside the text, with

CLEAR

you can erase text and with

you

can make space. By pressing

you can

switch between upper case letters, lower
case letters and numbers.

SENDING AND SAVING THE

WRITTEN MESSAGE

When the message is ready, press

SE-

LECT

Select the desired option with

and press

SELECT.

If you do not want to send or save anything,
press

QUIT.

QUIT

SELECT

Send only
Send with position

Send and save

Postpone

Summary of Contents for Track One

















































































































































































Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands

Benefon Track One, Owner'S Manual

Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands