Benefon Track One Owner'S Manual Download Page 138

Page: 138 / 177

132 MAIN MENU: SECURITY

Security code request

The security code is an access code for the

Telematics

menu,

Advanced telematics set-

tings

menu and

GPS settings

menu.

If these menus are secured with the security
code, the menus cannot be accessed with-
out keying in the code.

Press

CHANGE

. Use

to highlight the op-

tion you want to secure. You can select all
options, some of them, or none of them.
Press

SELECT

The selected option(s) will be marked with

In case you have already marked an option,
which you do not want to secure after all,
highlight that option again and press the
right soft key

OFF

. When the desired op-

tions have been marked, move the cursor to
point at

Save changes

and press

Key in the security code. In case of misspell-
ing, press

CLEAR

shortly to delete the

digits left of the cursor. Press

OK.

Change PIN code

In this menu you can change the PIN code
on your SIM card.

Press

CHANGE.

Key in the current PIN

code, then key in the new code and repeat
the new code by entering it again. Press

after each level.

If the PIN code entered first matches with
the PIN code stored in SIM card, and the
two new PIN codes match with each other,
the text

PIN code changed

will be displayed.

When changing the PIN code the PIN code
request must be activated.

Summary of Contents for Track One

















































































































































































Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands

Benefon Track One, Owner'S Manual

Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands