manualshive.com logo in svg

Benefon Track One, Owner'S Manual

Share
Download
Benefon Track One Owner'S Manual Download Page 154

148      MAIN MENU: GPS    

GPS settings

•Press 

-

 

SELECT

 to enter the 

GPS settings

menu. 

•Scroll through the sub-menus with 

n

.  

•Press 

.

 

QUIT

 to cancel the operation and

return to previous menu level.

•Press 

c

 to return to stand-by mode. This

can be done at any menu level.

The

 Telematics

 (functions), 

Advanced

telematics settings 

and

 GPS settings

 can be

secured by a security code. For further in-
formation about the code, please see the
chapters 

Introduction, Vocabulary, Securi-

ty code 

and  

Main menu, Security, Security

code request

 and 

Change security code.

GPS OPERATING MODE

The current operating mode is displayed.
Press 

-

 

CHANGE 

to enter the 

GPS operating

mode

 menu

.  

Scroll the list with 

n

. Select the operating

mode by pressing 

-

 

OK.

The GPS operating mode specifies how of-
ten the GPS tries to update the current po-
sition. You have different operating modes
to choose from. However, note that all the
GPS modes described below are not avail-
able in all phone models.

•

Full power

: You can turn the GPS on to

search for satellites (calculate position)
frequently. Using this mode consumes
more power than the other modes but it
has the best accuracy and works better in
limited satellite coverage. It is recom-
mendable to use this option if the phone
is attached to the quick charger or car kit.  

•

Low power

: The satellites are read at

slightly longer intervals. While this mode
has very low power consumption, it may
not be so reliable in limited satellite cov-
erage. 

•

Economy

: Reading satellites is adapted to

the present circumstances and optimized
according to the power consumption.
Interval for reading satellites might be
quite long and irregular. However, the

Summary of Contents for Track One


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands