Benefon Track One Owner'S Manual Download Page 32

Page: 32 / 177

26 OPERATION: WHAT TO DO FIRST

3. Lift the cap on the top of the rubber tab.

4. Fit the battery into place as described in

the previous chapter. The idea is that
the battery will be securely fastened in
the battery hole.

5. Finally stuff the bottom cover into the

bottom connector so that the cover will
be firmly secured around the connec-
tor.

Initializing the phone

When you start using the phone for the first
time, you should

charge the battery first.

Please note that the battery will reach its
full capacity only after two or three charg-
ing times.

Also note that the standard time (UTC)
comes to your phone from a satellite and

setting the time

requires searching for po-

sition (by turning the GPS on and lifting the
GPS antenna). Searching for position for
the first time might take some time (even 15
min) and the function

works only out-

doors

For further information about the GPS,
please see the chapters

Quick menu, Posi-

tion refresh

and

Main menu, GPS

For further information about configuring
the standard time (UTC) to show your local
time (the time used in your country), please
see the chapter

Main menu, Settings, Phone

settings, Date and time

Bottom cover

Bottom connector

Summary of Contents for Track One

















































































































































































Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands

Benefon Track One, Owner'S Manual

Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands