Benefon Track One Owner'S Manual Download Page 130

Page: 130 / 177

124 MAIN MENU: SETTINGS

EMERGENCY ENVIRONMENTS

In this menu you can determine the sound
and display settings, which will be on dur-
ing and after an emergency call.

1. Press

CHANGE

to enter the

Emergen-

cy environments

menu.

2. You can select either normal or silent

environment for the emergency calls.
Scroll with

and press

CHANGE

enter the desired environment menu.

3. A list of options is displayed:

By selecting

Activate

you can turn on

this particular environment. Confirm
your choice by pressing

OK.

By selecting

Tone

you can select the

melody, which will be used along
with emergency calls. When scrolling
the melody list with

you will hear

samples of each tone listed. Confirm
your choice by pressing

OK.

By selecting

Volume

, you can adjust

the volume, which will be used along
with this environment. When pressing

with

you will hear samples of each

volume level. Confirm your choice by
pressing

OK.

- You can also select other options,

such as

Ringing mode

Vibration

Hands free

and

Displays

, to be used

along with this environment. Select
the desired option by pressing

SE-

LECT

and confirm your choice by

pressing

By selecting

Call mode

, you can select

whether you wish the voice to be au-
dible one-way (to the center) or two-
ways (to the center and back to your
ear). Select with

and press

OK.

By selecting

Change name

, you can

rename the emergency environment
in question. Key in the new name and
press

SAVE.

Summary of Contents for Track One

















































































































































































Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands

Benefon Track One, Owner'S Manual

Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands