Benefon Track One Owner'S Manual Download Page 20

Page: 20 / 177

14 INTRODUCTION: BENEFON TRACK ONE

Keypad

Keys

The BeneGuard (SOS) button is

located on the top of the phone
(please see the previous picture).

Pressing the SOS button starts the
emergency procedure unless it is
cancelled in time.

Power on/off key. Topmost side key.

Pressing this key for a few seconds
turns the phone off.

z y

Volume keys. The keys are located

on the side of the phone. During a
call: Press to adjust earpiece vol-
ume. In stand-by mode: Press to
adjust keytone volume.

Handset up. Press to make a call,

answer a call and access to the
redial memory.

Handset down. Press to disconnect

the call and to return to stand-by
mode in any of the menu or memo
levels.

...

Numeric and alpha keys.

Soft keys. The function of the soft

keys depends on the guiding texts
on the bottom line of the display.

Power on/off
key

BeneGuard (SOS)
button

Summary of Contents for Track One

















































































































































































Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands

Benefon Track One, Owner'S Manual

Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands