Benefon Track One Owner'S Manual Download Page 19

Page: 19 / 177

INTRODUCTION: BENEFON TRACK ONE 13

Scroll key symbols. Located on the

lower side of the display. Moving in
horizontal direction is possible.

Scroll key symbols. Located on the

lower side of the display. Moving in
vertical direction is possible.

Scroll key symbols. This symbol is

displayed when the phone is in
stand-by mode. Entering quick
menu is possible.

This symbol is displayed only when

using the divert

all

calls option.

Incoming calls can be diverted to
another phone number or to a
voicemail service. The type of ser-
vice will depend on your network
operator.

The power on timer is turned on.

The phone will turn on automati-
cally, at the set time.

The power off timer is turned on.

The phone will turn off automati-
cally, at the set time.

[

GPS is in

Full power/Low power

mode, and it has a valid position.

GPS is searching for position.

]

GPS is sleeping to save power and

will automatically start searching for
new position after a while. While
sleeping, GPS is temporarily off.

The GPS is in

Economy

mode, and it

has searched and found position.

If none of the GPS-symbols is dis-

played, GPS is permanently turned
off.

Condition check timer is turned on.

Summary of Contents for Track One

















































































































































































Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands

Benefon Track One, Owner'S Manual

Search results

Summary of Contents for Track One

Reviews:

Brands by name

Popular brands