10AP Series Two-Post Lifts
52
P/N 5900265 — Rev. A6 — December 2022
Wiring the Microswitch
This section describes how to wire the Microswitch;
installing
the Microswitch was described in
The Lift comes with either one or two Microswitches, depending on the Power Unit:
•
1 Ph Power Units
. You need only one Microswitch, which must be wired between incoming
power and the Electrical Box on the Power Unit on one of the two “hot” wires.
•
3 Ph Power Units
. You need two Microswitches, which must be wired between incoming
power and the Electrical Box on the Power Unit on two of the three hot wires. Both Microswitches
you receive are identical. If wiring
two
Microswitches, they
must
be wired on two
different
hot
wires.
Refer to the diagrams in
for detailed Microswitch wiring information.
The following procedure assumes the Microswitch is already in place. If it is not, refer to
to install it.
To wire a Microswitch to the Lift
:
Locate the Microswitch Cable (14/4 SJO, UL 62, 300 VAC) supplied with the Lift.
On the Overhead Assembly
, connect one end of the Microswitch Cable to the Microswitch (or
two Microswitches, for a 3 Ph Power Unit). Refer to
for wiring information.
Route the Microswitch Cable from the Microswitch on the Overhead Assembly over to the
Powerside Post, down the Powerside Post, out the hole in the Post near the top of the Safety Lock
Release, and to the Electrical Box on the Power Unit.
NOTICE
The Microswitch Cable and the Short Hydraulic Hose must go
around
the Powerside
Safety Cover.
Once the Microswitch Cable is routed from the Microswitch to the Power Unit, clip the Microswitch
Cable using the clips on the Overhead Assembly and the inside of the Powerside Post.
Clipping the Microswitch Cable in place keeps it out of the way of the other components.
On the Power Unit
, open the Electrical Box and wire the Microswitch Cable per the instructions
in
Summary of Contents for Clearfloor 10AP
