BENDIX XVision, Manual

Page: 9 / 28

9
REPLACEMENT KITS
The following five kits contain replacement parts for the
XVision
®
System. Each of the replacement kits can be
ordered through Bendix.
For instructions on installing replacement parts, see the
appropriate section of
Servicing the XVision
®
System ,
beginning on Page 10.
AIMING ADJUSTER REPLACEMENT KIT
(PIECE NO. 5010079)
The IR camera bracket can only be ordered as a component
of the IR camera bracket kit. However, the components that
attach to the IR camera bracket to aim and adjust the
IR camera can each be ordered in the aiming adjuster
replacement kit . The kit includes the items below.
standoff pivot assembly (QTY 1) – fastens to the IR camera
standoff base with a maximum torque of 16 in-lbs.
standoff base (QTY 1) – fastens to the IR camera bracket
with #10 Plastite
®
Hex
®
flange head screw and lockwasher
with a maximum torque of 18-20 in-lbs.
aiming adjusters (QTY 2) – latch the IR camera into position
on the IR camera bracket and allow the IR camera forward
Field of Vision (FOV) to be adjusted horizontally and/or
vertically. The adjustment screw head(s) accommodate an
E8 external Torx
®
or a T15 internal Torx
®
tool. (The aiming
adjusters are fastened to the IR camera bracket and torqued
to 18 in-lbs. with four #8-32
Hex
®
/Torx
®
screws.)
WINDOW REPLACEMENT KIT (PIECE NO.
5010192)
The window replacement kit includes one replacement IR
camera window, o-ring and locking pin. See Figure 16.
HEATER REPLACEMENT KIT (PIECE NO.
5010193)
The heater replacement kit includes one replacement
IR camera heater and locking pin. See Figure 16.
COMBINER MIRROR REPLACEMENT KIT
(PIECE NO. 5010190)
The combiner mirror replacement kit includes one
replacement combiner. See Figures 17 & 28.
FOLD MIRROR REPLACEMENT KIT (PIECE
NO. 5010189)
The fold mirror replacement kit contains one replacement
fold mirror. See Figures 17 & 29.
Camera
Window Camera
Heater
O-ring
FIGURE 16 - IR CAMERA AND CAMERA HEATER
FIGURE 17 - COMBINER AND FOLD MIRROR
Fold Mirror
Combiner
FIGURE 15 - AIMING ADJUSTER REPLACEMENT KIT
Standoff Pivot
Assembly
(16 in-lbs.)
Standoff
Base
Aiming
Adjusters
#8-32
Hex
®
/ Torx
®
(18 in-lbs.)
#10 Plastite ® Hex ®
flange with lock
washer
(18-20 in-lbs.)
IR Camera
Locking Pin