Bender PEM533, Manual

Page: 28 / 96

Operation
28 PEM533_D00013_00_M_XXEN/06.2015
6.2 LCD testing
Pressing both the "POWER" and "HARMONICS" buttons simultaneously for > 2 sec-
onds enters the LCD testing mode. During testing, all LCD segments are illuminat-
ed for one second and then turned off for 1 second. This cycle will be repeated 3
times. After completion of the test run, the device automatically returns to its nor-
mal display mode.
Fig. 6.2: Display during an LCD test
6
"HARMONICS" button
Display harmonics
in the menu: move down one entry
in case of numerical values: reduce the value
7
"ENERGY" button
OK
Press > 3 s: toggling between setup menu and standard
display
Display measured values: Active and reactive energy
import / active and reactive energy export (line 5)
in the menu: selection of the parameter to be edited
confirm entry