Bender PEM533, Manual

Page: 38 / 96

Operation
38 PEM533_D00013_00_M_XXEN/06.2015
6.8 Setup using the button at the device
Press the "ENERGY" button (> 3 s) to access the Setup mode.
Press the "ENERGY" button again (> 3 s) to return to the display mode.
6.8.1 Setup: Function of the buttons
The meanings of the buttons in the SETUP mode are indicated below each button:
" V / I"
Arrow button " ": Moves the cursor to the left by one position if the parameter
being changed is a numerical value
" POWER"
Arrow button " " : To move up in the menu or increments a value
"„ HARMONICS"
Arrow button " " : Goes back to the last parameter in the menu or decrements a
numeric value.
" ENERGY"
Enter button: To confirm the value entered
6.8.2 Setup: Overview diagram menu
The following diagram will help you to familiarise yourself with the menu:
To change parameters you must first enter the
password .
(factory setting: 0)