Bender FTC470XET, Operating Manual

Page: 43 / 84

The user interface of the internal Web server
43 TGH1375en/02.2010
5. Sender:
You can modify the e-mail sender. Up to 50 characters may be entered into the edit field. Please
make sure that the sender's e-mail account is registered with ISP.
Factory setting = ftc470xet
Example:
ftc470xet@web.de
6. User (POP3/AUTH LOGIN):
Enter the user name predefined by ISP in order to get access to the e-mail server/POP3 server. Up to
50 characters may be entered into the edit field.
7. Password (POP3/AUTH LOGIN):
Enter the user name predefined by ISP in order to get access to the e-mail server/POP3 server. Enter
the password again into the second edit field. Up to 50 characters can be entered into the edit field.
8. Short form for SMS
When you have decided to send the notification as SMS in step 4, activate this function with
"Yes".Notifications will be sent in short form.
9. Text:
Choose the language version for your notification.
Factory setting = English version
10.Set alarm address:
Select "Yes" for the BMS addresses to which a notification is to be sent in case of alarm.
11.Confirm your actions with the "Save" button or stop your actions with "Cancel".
12.After correct setting and saving of the parameters you are recommended to check your settings by
forwarding a test e-mail. For details about forwarding a test mail refer to page 44.