Bender FTC470XET, Operating Manual

Page: 9 / 84

9 TGH1375en/02.2010
2. Safety instructions
2.1 Work activities on electrical installations
z
All work activities necessary for installation, commissioning or work activities during operation of
electrical devices or systems are to be carried out by adequately skilled personnel.
z
Observe the relevant regulations applying to work on electrical installations, in particular
EN 50110 or its subsequent regulation.
z
If the equipment is used outside the Federal Republic of Germany, the respective national standards
and regulations are to be observed. The European standard EN 50110 is recommended to be used as
a directive.
2.2 Address setting
A prerequisite for proper functioning of the FTC470XET protocol converter is its correct ad-
dress setting.
Ensure correct address setting at the FTC470XET. For details refer to the chapter basic con-
figuration beginning with page 19.
Unprofessional work activities on electrical installations may result in a
threat of danger to the life and health of human beings!
A ssigning addresses that are already used by existing devices in the BMS or TCP/IP
network concerned may cause serious malfunctions.