Bender FTC470XET, Operating Manual

Page: 42 / 84

The user interface of the internal Web server
42 TGH1375en/02.2010
6.6.13 E-mail parameter setting for notification in case of alarm.
On the occurrence of alarms or system faults, e-mail notifications can automatically be sent
to pre-defined addresses. The notification can be send to an e-mail address or to a mobile
phone after converting the e-mail via the Internet Service Provider ISP into SMS format. Short
form can be selected for SMS delivery. By default, the message delivery function is deactivat-
ed.
Contact your provider for the following information that is required for the installation of an
e-mail account. Check whether the SMPT or POP3 protocol is appropriate for authentication:
z
The IP address of the SMPT server;
z
The IP address of the POP3 server (optional);
z
A user name;
z
The appropriate password for the user name.
Use the diagram below to enter the appropriate data into the configuration mask (X = entry
required):
Parameterisation and activation of the notification function:
1. Use the BMS explorer to open the "E-mail settings" window.
2. Switch on "Sending an e-mail" by selecting "On" from the associated drop-down menu.
3. SMTP-Server/POP3-Server:
Enter the IP address of the mail server (SMTP) that is to be used for
e-mail forwarding by the protocol converter FTC470XET into the associated edit field. If your pro-
vider requires a POP3 authentication before forwarding the e-mail, also enter the IP address of this
server into the respective edit field.
The ISP can also predefine identical IP addresses for the two servers.
Format:
nnn.nnn.nnn.nnn
4. Recipient/2nd recipient:
You can also mix the forwarding types described below. Up to 50 characters can be entered into the
edit field.
Forwarding by e-mail:
Enter the e-mail address a notification is to be forwarded to in case of fault, if necessary also the
address of a second recipient.
Example:
first name.@bender-de.com
Forwarding per SMS:
This way of forwarding is only possible if the conversion e-mail/SMS is supported by your ISP.
Enter the special e-mail address to which the SMS is to be sent, if applicable also the special e-mail
address of a second recipient. The first part of the e-mail address consists of the number of the
mobile phone.
Example:
01234567890@t-d1-sms.de
Configuration of an
alarm notification
SMTP
authentication
only
POP3
authentication
before SMTP
authentication
Enter IP address for SMTP server X X
Enter IP address for POP3 server X
Enter user name for POP3/AUTH LOGIN (authentication) X X
Enter password for POP3/AUTH LOGIN (authentication) X X