Bender B93100735, Manual

Page: 9 / 116

Important information
9 PEM735_D00084_02_M_XXEN/06.2020
Telephone +49 6401 807-752**, -762 **(technical issues)
+49 6401 807-753** (commercial issues)
Fax : +49 6401 807-759
E-mail: fieldservice@bender-service.de
Internet : www.bender.de
*Available from 7.00 a.m. to 8.00 p.m. on 365 days of the year (CET/UTC+1)
**Mo-Thu 7.00 a.m. - 8.00 p.m., Fr 7.00 a.m. - 13.00 p.m
1.3 Seminars
Bender is happy to provide training regarding the use of test equipment.
The dates of training courses and workshops can be found on the Internet at
www.bender.de -> Know-how -> Seminars.
1.4 Delivery conditions
The conditions of sale and delivery set out by Bender apply.
For software products the "Softwareklausel zur Überlassung von Standard-Software als
Teil von Lieferungen, Ergänzung und Änderung der Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie" ( software clause in respect of the
licensing of standard software as part of deliveries, modifications and changes to gen-
eral delivery conditions for products and services in the electrical industry) set out by
the ZVEI (Zentralverband Elektrotechnik- und Elektronikindustrie e. V.) (German Electri-
cal and Electronic Manufacturer's Association) also applies.
Conditions of sale and delivery can be obtained from Bender in printed or electronic for-
mat.
1.5 Inspection, transport and storage
Inspect the dispatch and equipment packaging for damage, and compare the contents
of the package with the delivery documents. In the event of damage in transit, please
contact Bender immediately.
The devices must only be stored in areas where they are protected from dust, damp,
and spray and dripping water, and in which the specified storage temperatures can be
ensured.
1.6 Warranty and liability
Warranty and liability claims in the event of injury to persons or damage to property are
excluded if they can be attributed to one or more of the following causes:
 
Improper use of the device.