Note: The Suite is a two adult person lift. A second person will be required to lift and support the pre-assembled
parts during installation.
Note: The power cable needs be routed to the rear of the Suite. Care must be taken not to crush or damage the
cable when positioning the Suite. Before proceeding further ensure the power cable is connected to a power
supply
.
9
Installation- Floor-Standing
–
Suite
Continued……..
200817
Tip- Before proceeding further extend the centreline approximately 75mm up from the top of Wall Mount
Bracket and lightly mark the centre of the top back edge of the surround. This will help when trying to line the
bracket up with the slots on the back of the fire in the next installation step. See Diagrams 10 & 11.
Lifting the
Suite
as described on
P5
, offer the suite back to the wall approx.
90mm
above the top of the
Wall Mount
Bracket
and lower the
Suite
parallel with the wall into position. When lowering try to line up the central mark on the
wall and the top of the
Suite
, ensuring the
‘prongs
’ on the
Wall Mount Bracket
engage with the slots on the back of
the fire.
See Diagrams 12 & 13.
If necessary, repeat this step, until you are confident the
Suite
is fully engaged on the
Wall Mount Bracket
and if
required centralise on the installation location there will be some slight adjustment left and right.
The installation is now complete- The
fuel bed
can now be dressed and the
logs
positioned.
See Diagrams 27-31,
P15.
Diagram 12
Diagram 13
Diagram 10
Diagram 11
