Tip: Before dressing the fuel bed- position the foam
strip (supplied) in the channel in the base of the fire,
this will help to stop the smaller fuel bed material
falling into the channel during installation.
See Diagram 27.
The dressing of the fuel bed can be
fully tailored
to
the customers
individual tastes
. A sufficient amount
of each fuel bed finishing material has been provided
to cover the fuel bed in a
single type
of material
.
Diagram 30 -
Above shows an example of the
7 x
log set up for the
1000 3SL Fire .
15
Fuel Bed Layout & Log Positioning
200817
Diagram 27
Fuel Bed Dressing-
As a starting point follow the example below:
Diagram 28 -
Place a large amount of
crystals
in the centre of the fuel bed- leaving a gap around the edges.
Tip- The crystals pick up light from the under bed lights to give you a realistic glowing ember effect, so we
recommend using a generous amount.
Diagram 29-
Fill the space around the edges of the crystals with the
pebbles
, as well as randomly in between the
crystals.
Diagram 31 -
Above shows an example of the
5 x
log set up for the
750 3SL Fire .
Positioning the logs-
As a starting point follow the example below:
Note: The small logs for the 1000 3SL & 750 3SL Fires are different.
Large Log
Large Log
