5
Installation- Introduction
200817
Do not attempt to lift from the centre of the surround, instead lift from under the hearth and front edge of the
fire.
See Diagram 1.
Note: The Suite is a two adult person lift. A second person will be required to lift and support the pre-assembled
parts during installation.
Before the suite can be installed, consideration will need to be given to routing the power supply to the fire. This
will affect the stages of the installation process. We advise a qualified electrician to conduct any electrical parts of
the installation.
Note: A single socket is required for the operation of the suite
.
Installation- Preparation
Unpack your new
Suite
(Fire- Pre-Installed) and if purchased the
Flat Pack Plinth
.
Note: DO NOT dispose of the packaging until you have checked and made sure all the parts and fixings listed on
P4, are present..
Once the Suite is unpacked the
Cardboard Box
inside the fire needs to be removed and the contents checked, as
listed on
P4.
To do this, unscrew the
2 x Screws
holding the
2 x Glass Brackets
in place. There is
1 x Screw
either side of the
fire.
See Diagrams 2 & 3.
Note: The instructions are detailed for both 36” and 46” Suites
- Please familiarise yourself with the model you
have purchased before proceeding further.
Diagram 2
Diagram 3
Diagram 1
