16
Replacing the Glass
200817
With the rear of the
Glass
clean
and
angled forward slightly position the
Glass
in the channel in the base of the fire
(1)
, and carefully push back into position.
(2) See Diagrams 32 & 33.
Finally the
Glass
and
2 X Glass Brackets
can be refitted, using the previously removed
2 X Screws
.
Note- Before proceeding further remove the foam strip and check the channel in the base of the fire is free of
any fuel bed material.
Tip- Ensure the rear of the glass is clean before fixing in place.
Once in the correct position secure with the
2 X Screws
and
2 X Glass Brackets
.
1 X Screw and 1 x Glass Bracket
either side of the fire.
See Diagram 34.
The installation is now complete.
Note: Consult the separate Fire Operating Instructions for manual and remote operation.
Diagram 32
Diagram 33
Diagram 34
