Belmash MCS-400, Operating Manual

Page: 12 / 64

EN
12
This operating manual establishes machine service instructions and rules of safe operation.
Please read all instructions contained in this operating manual before using the machine.
The woodworking machines, if not operated safely, may endanger human life and health.
Hazardous exposure: noise, vibration, dust and cutting wastes, electricity.
Compliance with the requirements, specified in the operating manual, ensures safety while in
use and helps to avoid problems during operation and maintenance.
This operating manual does not reflects slight changes and modifications in machines, made
by the manufacturer after the publication of this manual, as well as changes in component
details and documentation attached to it
1. DECLARATION OF CONFORMITY EC/EEA
Joint limited liability company “Belmash factory” declares that masonry chain saw
BELMASH MCS-400
Comply with the following requirements of EU Directives, including changes:
BELLIS ATL No. 101-18-3292 (Safety);
BELLIS ATL No. 102-18-1768 (Safety);
BELLIS ATL No. 102-18-1767 (EMC).
A basis for concordance of the mentioned above devices with the EU Directives is their full
compliance with the applicable standards listed below:
EN 61029-1:2009+А11:2010;
EN 62233:2008 (incl. Corr: 2008)
EN 55014-1:2017;
EN 55014-2:2015;
EN 61000-3-2:2014;
EN 61000-3-3:2013+A1:2018
EN 61000-3-11:2017
01/333
Manufacturer: Belmash factory JLLC
37, Slavgorodskiy proezd, 212000 Mogilev, Republic of Belarus, info@belmash.by
Place and date: Minsk, Belarus 04.01.2019
Director ________________ D.V. Shorikov
Conformity certificates are stored at the address: Belmash factory JLLC
37, Slavgorodskiy proezd, 212000 Mogilev, Republic of Belarus, info@belmash.by