Belmash MCS-400, Operating Manual

Page: 15 / 64

EN
15
BELMASH MCS-400
3. PACKAGE SET
Package set is specified in table 4.
Table 4
№ Item, figure Name Quantity, pcs.
1 Fig. 1 Masonry chain saw 1
2 Item 3, fig. 1 Left support 1
3 Item 3a, fig. 1 Right support 1
4 Item 3b, fig. 1 Crossbar 1
5 Item 4, fig. 1 Pipe 1
6 Item 5, fig. 1 Support 1
7 Item 6, fig. 1 Angle device 1
8 Item 7, fig. 1 Chamfering device 1
9 Item 8, fig. 5 Protective guard 1
10 Item 9, fig. 1 Guide bar 1
11 Item 11, fig. 1 Upright frame 1
12 Item 12, fig. 1 Control panel 1
13 Item 13, fig. 1 Control pedal 1
14 Item 15, fig. 1 Thumb screw 4
15 Item 16, fig. 1 Thumb nut 1
16 Item 17, fig. 1 Plate 1
17 Item 20, fig. 1 Shell * 1
18 Item 21, fig. 1 Thumb screw 4
19 Item 22, fig. 1 Left support 1
20 Item 23, fig. 1 Right support 1
21 Item 24, fig. 1 Axle 1
22 Item 25, fig. 1 Wheel 2
23 Item 28, fig. 1 Washer 4
24 Item 36, fig. 4 Plate 1
24 Item 46, fig. 1 Washer 2
26 Item 49, fig. 3 Bushing 4
27 Item 51, fig. 1 Transportation handle 2
28 — Waste bag (not shown in figures) 1
Standard products
29 Item 10, fig. 1 Chain with hard-alloy teeth, 72 links, 3/8`` 1
30 Item 31, fig. 1 Sprocket crown, 3/8``, 7 teeth 1
31 — Sweep brush 1
32 — Fasteners 1 set
Documentation
33 — Operating manual 1
Personal means of protection
34 — Protective eyewear 1
35 — Protective mask 1
* - item is delivered mounted