Belmash MCS-400, Operating Manual

Page: 14 / 64

EN
14
2. BASIC PARAMETERS
Basic technical parameters of the machine and applied bearings and chain are specified in
tables 1, 2 and 3.
Table 1
Table 3
Description Size Quantity
Chain 3/8`` 72 links
Parameter description Value
Maximum cutting height, mm 400
Maximum width from upright frame to guide bar, mm 330
Maximum travel of working table, mm 635
Range of cutting angle when using angle device, degrees -90 ÷ +90
Guide bar length, inches 20
Rated chain linear speed, m/s 3,2
Rated speed of motor shaft at idle, min
-1
2850
Rated power consumption, W 2200
Rated voltage, V 230
Rated power mains frequency, Hz 50
Overall dimensions, L×W×H, mm 973×855×1270
Working table dimensions, L1×B1, mm 973×653
Weight of the machine with devices, not more, kg 87
Limit deviation of linear and angular dimensions should not exceed ±5%
Limit deviation of rotation speed should not exceed ±10%
Limit deviation of rated voltage should not exceed ±10%
Bearing item number Basic dimensions Mounting place Quantity
80100 10×26×8 Side bracket 8
Table 2