59
Bell
fi res
English
Instructions for use and installation instructions
Important:
•
Do not place any marble pebbles in front of the pilot light.
Make sure that the pilot light can burn freely over the main
burner.
•
Keep the burner orifi ces unblocked.
Only this way a proper ignition of the main burner is ensured.
Once the logs/marble pebbles have been positioned, the door must be closed again or
the glass must be replaced. FINGER-TIGHTEN any bolts and/or screws used. Do not
over-tighten them as this may break the glass!
If applicable, the frame can now be replaced.
Note: Do not fi t the frame until the wall
has been fi nished. Use the protective items supplied (gloves or cloth). Do not use
masking tape!
3.5.6 Mounting fl ue gas restriction plate
Depending on the length and shape of the concentric fl ue system and the chimney
construction, you should, if indicated, fi t a restriction plate with a certain width (B) into
the ceiling of the combustion chamber.
To do this, see the set-up options as listed in fi gure 9 through 18.
Important: Ensure that the correct fl ue gas restriction plate is mounted.
Use of the correct fl ue gas restriction plate will provide
optimum effi ciency, fl ame effect and combustion. Mounting
an incorrect fl ue gas restriction plate can result in damage
to the gas fi re.
Figure 36: Positioning restriction plate
Assembly
restriction
plate
