43
Bell
fi res
English
Instructions for use and installation instructions
When fi tting the appliance, it can be levelled with the adjustable feet.
Position the gas supply pipe such that it can be easily mounted after installation.
If the
appliance has a operating unit, the gas pipe must be leaded to where the
operating unit (built in), the gas regulating block (and the receiver) assembly are fi tted.
Push the appliance against the wall and ensure that it is level. The appliance may not
be installed against a fl ammable rear wall.
Attach the appliance to the wall with 2 wedge bolts. Use the adjustable mounting
brackets at the top of the appliance for this.
View Bell Room Divider Large: If the appliance is hung on the wall, attach it with
4 Ø8 mm or Ø10 mm key bolts. Ensure that the
appliance is hanging level and that the concentric
exhaust vent/combustion air supply connection of
the appliance is in perfect alignment with the hole
in the ceiling or wall!
Figure 20: Use of convection package and ventilation of fi replace
