10
Bell
fi res
English
Instructions for use and installation instructions
Ensure at all times that children and other people who are not
aware of the operation of the gas appliance are only in the vicinity
of the appliance exclusively under supervision.
Use a fi reguard to protect the people and children mentioned
above against possible burns.
2.3 OPERATING YOUR GAS FIRE - GENERAL
Read these instructions carefully before lighting the fi re !!
The gas fi re can be operated with a pilot light that burns continuously. The ignition and
control knob is located at the bottom of the front of your gas fi re or outside the gas fi re
in a special box (supplied). If the control knob is fi tted to the front of the gas fi re, the gas
fi re frame must be removed to access the knob.
The pilot light is situated in the front of the burner, behind a cowl.
Should the pilot light
go out, you must wait fi ve (5) minutes before attempting to re-ignite the fi re.
Important
Once the fi re is lit, it must burn at maximum for approx. 10 minutes to allow the chimney
to come up to temperature.
2.4
HAND CONTROL
The burner is operated using the control knob. Select the required setting and the
burner will then burn at this setting until it is changed.
Figure 1: Gas regulator block BM 733
“OFF” POSITION
IGNITION POSITION
CONTROL KNOB
BURNER CONTROL RANGE
