1
STAND-BY
De oproep-toets en de naam van de bewoner zijn steeds verlicht.
De knipperende rode LED geeft de aanwezigheid van de videobewaking aan.
2 OPROEP EN GESPREK
De duur van de oproep: maximaal 40 s
De duur van het gesprek: maximaal 90 s
Raak de toets aan.
De oproep wordt hoorbaar gesignaleerd.
U kunt de oproep stoppen als u opnieuw de toets aanraakt.
Als de bewoner antwoordt, vangt het gesprek aan.
Als toegang verleend wordt, geeft het paneel een hoorbaar signaal weer en het slot
blijft geopend voor maximaal 10 seconden.
Als de bewoner niet antwoordt, komt het paneel na 40 seconds, in de stand-by-stand.
7.3 Gebruik van het uitwendig paneel
3 OPDRACHT AUX
ONDERSTEUNENDE OPDRACHT
Ongeacht de staat van de terminal: bewaking, oproep of gesprek, kan deze
toets een aan de installatie verbonden automatisering in werking stellen:
toegangspoort voor auto of garage, een verlichtingssysteem etc.
2
OPROEPEN, SPREKEN EN TOEGANG VERLENEN
De duur van de oproep: maximaal 40 s
Wanneer de terminal opgeroepen wordt vanuit het uitwendige paneel, worden
de toetsen verlicht.
EEN OPROEP BEANTWOORDEN
De duur van het gesprek: maximaal 90 s
De led van de toets knippert en op de display verschijnt het beeld dat ontvangen
wordt door de videocamera van het externe paneel. Door de toets aan te raken begint
de communicatie. De led knippert niet meer. Raak de toets niet aan tijdens het
gesprek.
// Als er meer terminals bestaan die parallel zijn ingeschakeld, dan spelen ze allemaal
wanneer een oproep plaatsvindt. De terminal waarbij u de oproep beantwoordt, wordt
in werking gesteld en de andere terminals worden in stand-by teruggebracht.
TOEGANG VERLENEN
Nadat u de toets aanraakt wordt het slot geopend om de bezoekers toegang te
verlenen. Wanneer u iemand toegang verleent, wordt de communicatie met het
externe paneel niet beëindigd.
TOEGANG VERLENEN ZONDER EEN GESPREK TE VOEREN
A
ccess can be granted without communication. Touch first
the
monitoring key
than the access key . The lock is unblocked for the set time for the access of
the visitors. Granting access does not end the monitoring
.
BEËINDIGING VAN HET GESPREK
Bij de tweede aanraking van de toets wordt de communicatie met het
externe paneel beëindigd. De terminal wordt in stand-by gebracht.
Opmerking
: Wanneer de functies
Monitoring
en
Gesprek
worden geactiveerd, kunt u het Geluid en
het Beeld aanpassen. (Zie
S7. Beeld- en geluidsinstellingen)
Oproep
Gesprek
NL
15/16