BELGACOM Twist 250, User Manual

Page: 9 / 25

Twist 250
8
3. Calls
3.1.
Cordless phone basics
3.1.1. Handsfree
While having a conversation with your contact, you can enable the handsfree mode of the
handset.
1. Press to activate the handsfree mode of the handset.
2. To activate the handsfree mode, press again.
3.1.2. Make a call
Ensure that the handset is switched on.
1. Press the Talk key , you will hear the dialling tone and the display will show you the
phone icon .
2. Enter the phone number. The number is dialled.
- OR -
1. Enter the phone number first and then press key. If you make a mistake, press
key to remove the last digit.
2. To end the call, press or place handset on the base station.
3.1.3. Answering a call
1. When the phone rings, press the key to answer the call.
- OR -
1. If AUTO TALK MODE is ON, pick up the handset from the base station to answer (Refer
to paragraph 7.3 page 17).
2. Ending a call press key or place the handset in the base station.
3.1.4. Handset volume
You can adjust the volume of what you hear through the handset at any time by pressing
or key. You will hear a beep with each key press. You will hear a double beep when you
reach the highest or lowest setting.
3.1.5. Caller timer
After you press Talk key on the handset, the built-in call timer shows in the display (after
20 seconds) and counts the length of time of the call on minutes and seconds.
3.1.6. Auto talk off
Placing the handset in the case cradle while the handset is off the hook (during a call)
automatically hangs up the handset.