BELGACOM Twist 250, User Manual

Page: 19 / 25

Twist 250
18
8. Advanced settings
8.1.
Association handset & base
This function allows you to register a new handset on your base station
.
1. Press
Menu
. Select "
advanced set
" using the or key, press
Menu
.
2. Using the or key, select "
registration
". Press
Menu
.
3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the
«_» is replaced by a «*».
4. Press and hold key for 5 seconds (after 1 minute if no Handset has started
association process the base goes back to standby).
5. Press
Menu
to confirm. The display shall show "
WAITING
" to indicate the waiting state.
Once the handset is registered, you will hear a confirmation tone. The handset
automatically exits the registering mode.
When the handset has been successfully registered with the base station, a list of
numbers is displayed on your handset screen. Select the registration number.
If you do not select a registration number for your handset at this level, this
number will be automatically assigned by the base station.
6. The handset automatically exits the registering mode and the handset number is
displayed on the screen saver.
8.2.
Disassociation handset
This function allows you to remove the registration of a handset from your base station. You may
need to do this if you have lost a handset or if you have already registered 4 handsets on the
base station
.
1. Press
Menu
. Select "
advanced set
" using the or key, press
Menu
.
2. Using the or key, select "
UNregister
". Press
Menu
.
3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the
«_» is replaced by a «*». Press
Menu
to confirm.
4. The list of handsets registered on the base station is displayed on the screen.
Enter the number of the handset to be deleted. A confirmation signal sounds.
5. In standby mode, the handset displays "
pls reg h/s
”.
8.3.
Base master PIN code
The base station code (default setting 0000) is required to access certain functions. This code
must include 4 digits.
1. Press
Menu
. Select "
advanced set
" using the or key, press
Menu
.
2. "
change pin
" appears on the screen. Press
Menu
.
The base station code entry screen is displayed.
3. First enter your current PIN number. Each time a digit is entered the «_» is replaced
by a «*». Press
Menu
to confirm.
4. Enter your new PIN number. Each time a digit is entered the «_» is replaced by a «*».
5. Confirm by re-entering the new PIN number. Press
Menu
to confirm.
You will hear a confirmation tone.