BELGACOM Twist 250, User Manual

Page: 10 / 25

Twist 250
9
3.1.7. Redialling a call
The last five numbers you have dialled can be quickly redialled.
Redialling from Standby Mode:
1. Press key. The phone number that was last dialled appears on the display.
2. Press the or key to review redial telephone list. (You can select to redial your last
five numbers called).
3. Press key to dial out the number.
3.1.8. Microphone mute function
During a call you can switch OFF the microphone. The call is placed on hold.
-
Enable MUTE function
: Press the key during a call. The display
shows "
Mute on
". Your correspondent will not be able to hear you.
-
Disable MUTE function
: Press the key to continue the call.
3.1.9. Recall / Flash
Press the
R
key to access line transfer offered by PABX or call waiting provided by
telephone Company or permit access to the Belgacom comfort services (set 2-way
conversation, switch from one contact to the other, set a three party conference).
3.1.10. Paging the handset
To locate a misplaced handset, press on the base station, the " " icon flashes and the
message ‘”
Paging
” appears until you press the Call key .
3.1.11. Voice Mail (According to operator)
This function allows you to receive calls while you are absent. You can then listen to the
messages as network Voice Mails.
To indicate that a new message has been received the envelope icon and the new event
message “
VOICEMAIL
” are displayed on the Handset screen.
1.
While on idle screen, press and hold in order to access voice messaging service
.
2.
The envelope icon disappears when there are no more new messages
.
Note !
Your voicemail number is not set in the factory, you can set the number using the
key . To proceed, turn to paragraph 5.5 page 9
.
3.2.
Calling line identification presentation (CLIP)
This CLIP phone stores and displays CLIP information provided by your local telephone
company.
You must subscribe to CLIP service in order to use this unit.
If you have not subscribed to CLIP service or if the caller number is «suppressed», the display
shows unknown.
Caller ID call waiting is not working in Pulse dialling mode.
3.2.1. Caller list
CLIP of incoming Call are stored in the CALLER LIST menu.
When you enter the CALLER LIST menu, the display will show icon
.
The list contains the numbers of the last 10 contacts call lasted and the duration of each call .
If the number is not transmitted, only duration can be shown.