Twist 250
21
11.2.
Troubleshooting tips
11.2.1. Caller id
Problem Solution
No display
•
Did you order Caller ID service from your local telephone company?
11.2.2. Telephone
Problem Solution
No dial tone
•
Check installation:
•
- Is the base power cord connected to a working outlet?
•
- Is the telephone line cord connected to the base unit and the wall
jack?
•
Disconnect the base from the wall jack and connect another phone to
the same jack. If there is no dial tone in the second phone, the problem
might be your wiring or local service.
•
Is the handset out of range of the base?
•
Are the batteries correctly charged (15 hours)?
•
Are the batteries correctly installed?
•
Did the IN USE indicator come on?
Try to recharge the batteries.
Handset does not
ring
•
Make sure the RINGER setting on the handset is programmed to ON.
•
You may have too many extension phones on your line. Try unplugging
some phones.
•
See solutions for «NO dial tone».
You experience
static, noise or fading
in and out
•
Change channels.
•
Is handset out of range?
Move closer to the base.
•
Does the base need to be relocated?
•
Recharge the batteries.
•
Make sure base is not plugged into an outlet with another household
appliance.
11.3.
Unit beeps
- Place handset in base for 20 seconds to reset the security code. If that doesn’t work,
recharge the batteries for 15 hours.
- Clean charging contacts on handset and base with a soft cloth.
- See solutions for «No dial tone».
- Replace the batteries.
11.4.
Memory dialling
- Did you program the memory location keys correctly?
- Did you follow proper dialling sequence?
- Make sure the tone/pulse setting is correct.
- Have you re-registered the numbers after a power cut battery replacement?
Summary of Contents for Twist 250
Page 1: ...Belgacom Twist 250 User manual...
Page 25: ......
