Twist 250
11
3.2.6. Storing memory from the caller list
1. Press
or . The list of calls made or received is displayed.
2. Use
or
to select the desired caller number.
3. Press
Menu
key, then select "
save number
". Press
Menu
.
4.
Enter the name of the entry. Press
Menu
. The number is displayed.
5. Press
Menu
to confirm the number.
The entry is stored in the phonebook. You will hear a confirmation tone.
Note !
If the number is too long (more than 12 digits), the screen will not show the number
in full.
Press
key to go to last number page for CID length.
4. Using the Multi-Handset capabilities
These functions are used for handset management when two or more handsets are registered on
the same base.
4.1.
Intercom Call /Intercom
1. Press
the
key on the handset.
-
If your installation has two handsets, the second handset is directly called, and "
int
"
followed by the handset number are displayed on the screen.
-
The display shows the " " icon and the number of all registered handsets.
-
Enter the desired handset number or press the
key if you want to call all
handsets. The handset(s) ring(s).
2.
On the called handset, press the
key to answer.
Handset 4
4.2.
Answering an internal call
1.
The ring melody from an internal call is different from an external call. "
HANDSET
" and the
calling handset number appear on the screen. " " is blinking.
2. Press
the key to answer. The " " stop blinking.
3.
Ending an internal call press the
key.
Summary of Contents for Twist 250
Page 1: ...Belgacom Twist 250 User manual...
Page 25: ......
