BELGACOM Twist 250, User Manual

Page: 6 / 25

Twist 250
5
1. Insert the batteries one by one and the right way round as indicated by their polarities in the
battery compartment shown in the figure.
2. Put the compartment door back on.
3. Plug the power supply cord into AC outlet and the other end into the power jack on the base
bottom.
4. Place the handset in the base station to charge for 15 hours prior to first use. if you don’t
properly charge the phone, battery performance will be compromised.
5. Plug one end of the telephone line cord into the modular wall phone jack and the other end
into the jack on the base (as shown in the illustration).
6. Once the batteries are recharged, press key, you can hear dial tone.
Only use the supplied power adapter, connect it to the base socket according to the
installation instructions provided in this booklet and the indications on the identification
label affixed to it (voltage, current, electric network frequency). As a safety measure, you
can use the power adaptors to cut off the 230V current in case of danger. They must be
located near to the device, and must be easily accessible.
1.3.
Welcome screen
You can change the display on the screen saver.
For this purpose, press and hold down the key
.
To return to the previous display, press and hold down the key .