Belden Hirschmann OWL LTE M12, User Manual

Page: 66 / 153

Configuration 4.8 NAT Configuration
Item Description
Public Port(s) The public port numbers range for NAT. Enter the initial and final
port numbers separated by the hyphen mark. One static port is
allowed as well.
Private Port(s) The private port numbers range for NAT. Enter the initial and final
port numbers separated by the hyphen mark. One static port is
allowed as well.
Type Protocol type – TCP or UDP.
Server IPv4 address In
IPv4 NAT Configuration
only. IPv4 address where the router
forwards incoming data.
Server IPv6 address In IPv6 NAT Configuration only. IPv6 address where the router
forwards incoming data.
Table 30: NAT Configuration
If you require more than sixteen NAT rules, insert the remaining rules into the Startup Script.
The Startup Script dialog is located on Scripts page in the Configuration section of the menu.
When creating your rules in the Startup Script, use this command for IPv4 NAT:
iptables -t nat -A pre_nat -p tcp --dport [PORT_PUBLIC] -j DNAT
--to-destination [IPADDR]:[PORT_PRIVATE]
Enter the IP address
[IPADDR]
, the public ports numbers
[PORT_PUBLIC]
, and private
[PORT_PRIVATE]
in place of square brackets. For IPv6 NAT use
ip6tables
command with same options.:
ip6tables -t nat -A napt -p tcp --dport [PORT_PUBLIC] -j DNAT
--to-destination [IP6ADDR]:[PORT_PRIVATE]
If you enable the following options and enter the port number, the router allows you to re-
motely access to the router from WAN (Mobile WAN) interface.
Item Description
Enable remote HTTP access on port This option sets the redirect from HTTP to
HTTPS only (disabled in default configuration).
Enable remote HTTPS access on port If field and port number are filled in, configura-
tion of the router over web interface is allowed
(disabled in default configuration).
Enable remote FTP access on port Select this option to allow access to the router
using FTP (disabled in default configuration).
Enable remote SSH access on port Select this option to allow access to the router
using SSH (disabled in default configuration).
Enable remote Telnet access on port Select this option to allow access to the router
using Telnet (disabled in default configuration).
Enable remote SNMP access on port Select this option to allow access to the router
using
SNMP (disabled in default configuration).
Continued on next page
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
65