Customization
5 Customization
5.1 User Modules
You may run custom software programs in the router to enhance the features of the router.
Use the
User Modules
menu item to add new software modules to the router, to remove them,
or to change their configuration. Use the
Browse
button to select the user module (compiled
module has tgz extension). Use the
Add
button to add a user module.
Figure 70: User modules
The new module appears in the list of modules on the same page. If the module contains an
index.html or index.cgi page, the module name serves as a link to this page. The module can
be deleted using the
Delete
button.
Updating a module is done the same way. Click the
Add
button and the module with the
higher (newer) version will replace the existing module. The current module configuration is left
in the same state.
Programming and compiling of modules is described in the "Programming of User Modules"
application note. You can get the PDF at:
https://hirschmann-support.belden.com
Figure 71: Added user module
User modules can be custom-programmed. Some typical user modules are prepared by
Hirchmann and are available on the web site for the download.
In
some
cases
the
firmware
update
can
cause
incompatibility
with
installed
user
mod-
ules.
Please refer to the release notes of the OWL firmware and of the user modules to
check for compatibility.
Information about the user module and the firmware compatibility is at the beginning of the user
module’s Application Note.
124
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
Summary of Contents for Hirschmann OWL LTE M12
Page 153: ......
