Configuration
4.14 Services
Continued from previous page
SMS
Description
reboot
The router reboots
get ip
The router responds with the IP address of the SIM card
Table 52: Control SMS
Note:
Every received control SMS is processed and then
deleted
from the router! This
may cause a confusion when you want to use AT-SMS protocol for reading received SMS
(see section below).
Advanced SMS control:
If there is unknown command in received SMS and remote control
via SMS is enabled, the script located in "/var/scripts/sms" is run before the SMS is deleted. It is
possible to define your own additional SMS commands using this script. Maximum of 7 words
can be used in such SMS. Since the script file is located in RAM of the router, it is possible to add
creation of such file to Startup Script. See example in the "Commands and Scripts" application
note. You can download the PDF on the Internet at:
https://www.doc.hirschmann.com
AT-SMS Protocol
AT-SMS protocol is a private set of AT commands supported by the routers. It can be used to
access the cellular module in the router directly via commonly used AT commands, work with
short messages (send SMS) and cellular module state information and settings.
Choosing
Enable AT-SMS protocol on expansion port 1
and
Baudrate
makes it possible to
use AT-SMS protocol on the serial Port 1.
Item
Description
Baudrate
Communication speed on the expansion port 1
Table 53: Send SMS on the serial Port 1
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
101
Summary of Contents for Hirschmann OWL LTE M12
Page 153: ......
