Belden Hirschmann OBR40, User Manual

Page: 7 / 28

Installation OBR40
Release 01 04/2013
7
Non-observance of these safety instructions can cause material damage
and/or injuries.

Only appropriately qualified personnel should work on this device or in
its vicinity. The personnel must be thoroughly familiar with all the
warnings and maintenance procedures outlined in this operating
manual.

The proper and safe operation of this device depends on proper
handling during transportation, proper storage and assembly, and
conscientious operation and maintenance procedures.

Never start operation with damaged components.

Only use the devices in accordance with this manual. In particular,
observe all warnings and safety-related information.

Any work that may be required on the electrical installation may only
be carried out by personnel trained for this purpose.

National and international safety regulations

Make sure that the electrical installation meets local or nationally
applicable safety regulations.

CE marking
The labeled devices comply with the regulations contained in the following
European directive(s):
2011/65/EU (RoHS)
Directive of the European Parliament and of the Council on the restriction
of the use of certain hazardous substances in electrical and electronic
equipment.
2004/108/EG (EMV)
Directive of the European Parliament and the council for standardizing the
regulations of member states with regard to electromagnetic
compatibility.
In accordance with the above-named EU directive(s), the EU conformity
declaration will be at the disposal of the relevant authorities at the
following address:
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Tel.: +49 1805 141538
The product can be used in the industrial sector.
 Interference immunity: EN 61000-6-2

Emitted interference: EN 55022