18
Installation OBR40
Release 01 04/2013
2.4
Mounting on the DIN rail
Note:
Mount the device on a 35 mm DIN rail in accordance with DIN EN
60175.
Make sure there is at least 10 cm of space above and below the device.
Insert the upper snap-in guide of the device into the DIN rail and press the
device down against the DIN rail until it snaps into place.
Figure 5: Mounting on the DIN rail
2.5
Connecting the data lines
Note:
To protect the connections for data lines from dirt or dust when they
are not being used, use the sealing caps provided for the optical connections.
WARNING
Do not look into the optical connections. The concentrated, invisible light
can damage the eyes.
1
2
Summary of Contents for Hirschmann OBR40
Page 4: ...4 Installation OBR40 Release 01 04 2013 ...
Page 28: ......