16
Installation BAT450-F
Release 12 07/2020
Applies exclusively to device variants with approval for the 4.9 GHz band
(Approvals 2, characteristic value P) according to
FCC 47CFR Part 90 Subpart Y:
Operation of the device in the 4.9 GHz band requires trained
personnel familiar with the regulatory requirements for operation
according to FCC 47CFR Part 90 Subpart Y.
The 4.9 GHz band is a licensed band. State and local government
entities that provide public safety services are eligible to apply for
4.9 GHz licenses. For more information, see the Federal
Communications Commission (FCC) regulations. The installer or
operator is responsible for obtaining the appropriate site licenses
before installing or using the system.
The antenna gain of the antenna must not exceed 9 dBi.
For antennas with an antenna gain >9 dBi, the transmit power must be
reduced accordingly in the device software. You can find step-by-step
instructions for reducing the transmit power in the device software in
the
“Configuring the transmit power for the 4.9 GHz band” on page 53
chapter.
EWLAN2 Module
Note for the use in the USA and in Canada
The following section applies to device variants with characteristic
value US (USA/Canada) for country approvals, which are labeled as
follows:
Contains Transmitter Module
FCC ID: U99EWLAN2
IC: 4019A-EWLAN2
This equipment complies with FCC and IC RSS-102 radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance of 19.7 in (50 cm) (related
to a 18 dBi antenna) between the radiation source and your body.
The antenna used for this transmitter must not be co-located with any
other transmitters within a host device, except in accordance with FCC
multi-transmitter product procedures.
This transmitter is restricted to indoor use only within the
5.15 to 5.25 GHz band to reduce potential for harmful interference to co-
channel mobile satellite systems.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
