Installation BAT450-F
Release 12 07/2020
45
4
First login (Password change)
Applies to devices with the following software release and later:
HiLCOS 10.12-RU2
To help prevent undesired access to the device, it is imperative that you
change the default password during initial setup.
Perform the following steps:
Open the Graphical User Interface, the Command Line Interface or
LANconfig the first time you log on to the device.
Log on to the device with the default password “private”.
The device prompts you to type in a new password.
Note:
When you log on with LANconfig, the device prompts you to type in
a new password before your first configuration change.
Type in your new password.
Choose a password that contains at least 8 characters which includes
upper-case characters, lower-case characters, numerical digits and
special characters.
Confirm your new password.
https://hirschmann-support.belden.com/en/kb/required-password-change-
new-procedure-for-first-time-login
