Installa
tio
n
BAT450
-F
Release
12
0
7/2020
19
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more than that permitted for successful communication.
The FCC approval is valid only in conjunction with the listed antennas. If other antennas are used, the approval
expires. The responsibility lies with the operator of the system. The required antenna impedance is 50
Ω
.
Note for the use in Oman
This note applies to BAT450-F variants with the characteristic value OM (Oman) for country approvals:
This telecommunication equipment complies with the technical requirements of the Telecommunications Regulatory
Authority (TRA) and is labeled as follows:
Recycling note
After usage, this device must be disposed of properly as electronic waste, in accordance with the current disposal
regulations of your county, state, and country.
Antenna(s) for operation with this
device:
Permitted band of operation
2.4 GHz band
5 GHz band
5180 ... 5240 MHz
5260 ... 5320 MHz
5500 ... 5720 MHz
5745 ... 5825 MHz
BAT-ANT-RSMA-2AGN-R
a
a. Note: When using 2 antennas type BAT-ANT-RSMA-2AGN-R, you must align each antenna in another spatial direction (x-y) so that both antennas
are arranged at right angles to each other.
Yes
Yes
Yes
Yes
Yes
BAT-ANT-N-MiMoDB-5N-IP65
Yes
Yes
Yes
Yes
Yes
OMAN - TRA
R/4116/17
D100428
