Configuring the XIP-3901-GB-IP Application
INSTALLATION AND OPERATION GUIDE
XIP-3901 | 131
Property
Description
Link Offset
Shows the resulting link latency after being read out from receiver's buffer.
This measurement is the difference between the packet RTP timestamp and the PTP time
after the receiver's buffer and represents the total reception delay.
Syntonized
Audio 1 to 4
Set to ignore Audio RTP timestamps. Audio buffer reception is then fixed to 25%. Use these
settings to manage audio streams that are not properly time stamped. Enable syntonize for
audio 1 to 4 individually.
11.4.3 Redundancy Tab
This tab allows you to view the reception state regarding SMPTE ST 2022-7 redundancy. The primary and
secondary streams, at the packet level, will work together in order to produce a valid resulting stream. To achieve
redundancy, both streams need to be in range with respect to the receiver buffer. In the circumstance in which
only one stream is successfully received, the resulting stream will be valid as well but without any active
redundancy protection.
The XIP-3901-GB-
IP’s
Receivers
Panel,
Redundancy
tab configuration is the same as the XIP-3901-UCP-
IP’s
IP’s
Receivers
Panel,
Redundancy
tab configuration; see 10.4.3 - Redundancy Tab on page 90.