INSTALLATION AND OPERATION GUIDE
32 | XIP-3901
7
Card Upgrade
The XIP-3901 card upgrade can be made through iControl Solo or through the iControl Appserver.
Starting iControl Solo
To setup the XIP-3901 card, you must have installed on your PC iControl Solo, version 7.51 or higher.
To verify the version of iControl Solo installed on your PC, go to the
Help
menu and select
About
, as shown
below:
iControl Solo can be downloaded from the Grass Valley website. See
Downloading new XIP applications
XIP-3901 applications can be downloaded from the Grass Valley support site, under
Downloads for Broadcast
Products
and look for
XIP-3901 Agile Modular SDI/IP Processing Platform for Densité 3+
to download latest
applications.
This is a .ZIP file. Do not unzip the file for the following procedures.
Installing new applications on the XIP-3901
To install a new application on an XIP-3901, proceed as follows:
1. In iControl Solo or in iControl Navigator, go in the
Tools
menu and select
Densité Upgrade Manag
er, as
shown below:
This will start the Densité Upgrade Manager. It may take a few minutes for the frames and cards to
populate the window.
