Belden grass valley Kaleido-IP X120, Installation & Service Manual

Page: 77 / 110

77
Kaleido-IP X320/X120
Installation & Service Manual
4 Expand the streaming options section for the head you want to configure.
5 Select Enable streaming and configure the appropriate parameters for your purposes:
a Select the desired output resolution, encoding format, encoding mode, streaming
mode.
b Type the appropriate bit rate.
c Configure multicast options if needed.
6 Click Apply configuration .
Notes
• If the streaming output is meant to feed a Kaleido-IP multiviewer, the
following output resolution / bit rate combinations should ensure good
video quality on the monitor wall:
• 1920
× 1080 at 15000 kbps
• 1280 × 720 at 11000 kbps
• 960 × 540 at 8000 kbps
• 720 × 480 at 8000 kbps
• 720 × 576 at 8000 kbps
• 480 × 270 at 3500 kbps
• If you choose MPEG-2 compression, limit the output resolution to 720p.
• In CBR mode, the minimum bit rate is:
• 3500 kbps for MPEG-2
• 1500 kbps for H.264
XAdmin does not prevent you from specifying a lower bit rate but the
Kaleido Software will ignore lower values and enforce the appropriate
minimum listed above.