Belden grass valley Kaleido-IP X120, Installation & Service Manual

Page: 68 / 110

68
System Configuration
Testing the Monitor Wall Operation
If your system was configured prior to shipment, then a layout will appear on all
displays. Otherwise, a gray screen will appear with the following message in the
middle:

“No layout has been assigned to this room. Please load a layout.”
Testing the Monitor Wall Operation
If your system was configured prior to shipment, then a layout appears on all displays.
Otherwise, a gray screen will appear with the following message in the middle:
No layout
has been assigned to this room. Please load a layout.
To load a layout on the monitor wall
• If you have configured a Kaleido-RCP2 (see Using a Kaleido-RCP2 with Default Settings ,
on page 67), press any of the LAYOUT PRESETS buttons to load a predefined layout on
the monitor wall.
• Alternatively, connect a mouse directly to one of the Kaleido-IP frame’s
USB ports. See
Troubleshooting with the Kaleido-IP frame’s USB ports , on page 96 for more
information about this.
a Right-click anywhere on the monitor wall, point to Monitor Wall (if you clicked a
monitor), and then click Load layout on the shortcut menu.

A layout browser appears on the displays associated with the current room.
b Select the layout you want to load from the list of available layouts for this room,
and then click OK .

The selected layout appears on the room displays.
Customizing Layouts, Logical Sources, and other Kaleido-IP
Elements
Refer to the Kaleido Software User Manual to learn how to customize the Kaleido-IP to suit
your specific needs. See
Related Documentation
, on page 15
.
Note:
To access other layouts, press the LOAD button. To assign a layout to
a preset button, press and hold the button for more than six seconds while
the desired layout is showing on the monitor wall.
Note:
To access other layouts, press the LOAD button. To assign a layout to
a preset button, press and hold the button for more than six seconds while
the desired layout is showing on the monitor wall.