Belden grass valley Kaleido-IP X120, Installation & Service Manual

Page: 107 / 110

107
Kaleido-IP X320/X120
Installation & Service Manual
Drivers for Controlling Tally Interface Devices from the Multiviewer
Drivers are available to extend your Kaleido-X system with the ability to control tally
interface devices such as the ones listed in the tables below. Contact your sales
representative for more information.
Nevion (Network
Electronics) Network Modular (Ethernet) No VikinX Modular
PESA USP (Unsolicited Status
Protocol) No Cheetah, Tiger, Jaguar,
Cougar, Ocelot, Bobcat,
TDM3000, PERC2000 system
controller
Grass Valley (SAM /
Snell / Pro-Bel) General Switcher Protocol
(SW-P-02) No
Sony Sony HKSPC (GVGNP
Emulator) No Sony routers (requires HKSPC
card); GVG routers (Ethernet)
Utah Scientific PL-160/PL-320 No AVS-1B
RCP-1 No SC-1, SC-2, SC-3 series
RCP-3 Yes SC-4 series (Ethernet only)
a. Deprecated. To be used with legacy configurations only.
b.To be used in most cases. Supports native locks, and aliases from router (provided system controller
has NV9000 router control system version 6.0.6 or later)
c. To be used in very specific scenarios involving physical router interconnects with tie lines, or with
hybrid router configurations. Contact Technical Support for more information (see Grass Valley
Technical Support , on page 110).
d.For Thomson / Grass Valley Series 7000 devices, our current implementation of the Series 7000
Native Protocol supports some Encore system controller models, which are supported by Ethernet
connection. For other Series 7000 devices you wish to control by Ethernet connection, use the Sony
HKSPC (GVGNP Emulator).
e. Our current implementations of the protocols listed above for Grass Valley (Thomson/Philips)
routers and controllers support neither the CM-4400 nor the CM-4000 system controllers.
Company Protocol
Text
database
download Routers/Controllers
Production Switchers
Company Device/System
Grass Valley (Thomson) Kayenne K-Frame, Karrera K-Frame, Zodiak, XtenDD HD/SD series